Feeney 5 ft. 3-in-1 Trellis KitItem#: HN-FEE001
13 rods, 12 fittings, 6 connector tubes, 16 cross-clamp fittings, 12 plastic anchor inserts, Instructions
What's Not Included
If you're just not sure what style of trellis your climbing flowers will prefer the most, why not keep your options open with the Feeney 5 ft. 3-in-1 Trellis Kit?This is a complete, easy-to-assemble, all stainless steel wall mount trellis kit. It includes 1/8-inch diameter rods and special mounting components that you can configure in one of three ways: fan, grid, or diamond. Or, create your own design with the included components. Each of the 13 rods is 48-inches long and can be spliced together using the included Connector Tubes. They're supported by specially designed 2-inch Stand-Off fittings that screw into the wall to hold the trellis upright. Micro Cross-Clamp fittings secure each cross section in place. The standard layouts range in size from 54W x 62H inches to 35W x 69H inches.
Each kit includes:
- 12 stainless steel 2-inch Stand-Off fittings with mounting screws
- 13 stainless steel rods - 48-inches long each
- 6 stainless Rod Connector Tubes
- 16 stainless steel Micro Cross-Clamp fittings
- 12 plastic anchor inserts (for masonry or concrete)
- Installation instructions
To install the 3-in-1 trellis
- 1. Measure and mark the layout on your wall
2. Drill holes to mount the Stand-Off fittings
3. Screw the Stand-Off fittings to the wall
4. Lace the rods through the Stand-Off fittings and secure by tightening the setscrews
5. Connect intersecting rods with Micro Cross-Clamp fittings
6. Trim the excess rod, and you're done!
Dimensions & Specifications
54L x .05W x 62H in.
- Made from plastic
- Green colored pH meter
- Meter comes with full instructions
- Batteries not required
- Dimensions: 10L x 2.25W in.