Music of the Spheres Pentatonic Soprano 30 Inch Wind Chime

Description

The positive tones of this soprano wind chime will energize you as you listen. The Music of the Spheres Pentatonic 30-inch Soprano Wind Chime features a pleasant major scale arrangement. Hang this chime on your porch to cheerfully greet guests. This chime contains all the notes of "Amazing Grace" when combined with the alto and bass sizes (sold separately).

The Pentatonic Wind Chime is handcrafted and tuned to A440, which is a standard orchestral pitch. It is made of a tempered aluminum alloy tubing that will never rust. Each tube is coated with a sleek black corrosion-resistant finish that provides durability in outdoor environments. Made in the USA.

Click on the Music of the Spheres Product Information link below to learn more about the materials, craftsmanship, and tuning process involved in the creation of this wind chime.

Wind Chime Length: The length of a wind chime is measured by the overall length of the chime (not tube length)- hanging hook to the end of the sail. This windchime is 30 inches long overall.

About Music of the Spheres
In 1989, Larry Roark started Music of the Spheres in his garage with a few hand tools and some galvanized steel tubing. Since then, the company has continued to grow both in sales and in square footage. Hand-made with the same attention to quality and detail as before, their melodious chimes have struck the correct chord with customers. One of the leading manufacturers of familiar and exotic wind chimes in the market today, Music of the Spheres remains dedicated to making their chimes look and sound their best.

Dimensions & Specifications

Assembly

Hanging your wind chime:
There are a number of safe ways to hang your chime. The best for a particular circumstance will depend on which chime size you're hanging and where it is you would like it to hang. In all cases, simply using some basic common sense is a great start. In many cases, hanging a chime properly is not a complicated matter. Some chime hanging basics are:

• Don't hang your chime on anything that is sharp or abrasive. Over time the cord will be cut or worn and will eventually break. For instance, instead of hanging the chime from an old rusty nail, take the time to get a carabiner or some other sort of metal ring. Hang the chime from the ring, then hang the ring from the nail.
• Consider the fact that the forces on the chime support will vary and will increase substantially during severe weather conditions. When planning the support for your chime, take the time to do it right by preparing for stormy conditions.
• Test the installation by giving a tug on the chime after hanging it to make sure it stays put. For the smaller chimes, a gentle downward pull will suffice; whereas for the larger, heavier chimes, a good solid downward test pull is a good idea. A good rule of thumb is to test the installation with a force that is between two and three times the weight of the chime.
• Be considerate of your tree. When hanging chimes from a tree limb, use a blanket or a piece of rubber to spread out the load on the limb. This will avoid cutting into the bark and damaging the tree. A section of an old bicycle tire works very well for this purpose.
• Use a deck hook as a safe and convenient way to hang the chimes from a deck railing.
• Use a wall bracket to hang the chime from a wall. If mounting the bracket on a brick, stone or masonry wall, use the proper inserts for the job.