The perfect finishing touch for your new range hood assembly, the Windster 36W in. Back Splash is easy to install anywhere in your kitchen. Keep the wall beneath your blower protected from cooking splatters and filter residue with this handy unit. Constructed from sturdy, durable stainless steel, this unit is made to match your Windster brand range hood that's 36-inches wide. A brushed stainless steel finish helps pair with modern decors and makes the surface easy to wipe down with only a damp rag. This back splash has been approved ...
The Vent-A-Hood 36W in. Warming Shelf Assembly is an ideal addition to your brand new Vent-A-Hood kitchen blower. Let your ventilation system do double duty with the sturdy set of shelves. Each shelf measures 10 inches deep by 14 inches wide and is made from sturdy stainless steel with a rack style design. The shelves comes with a 3.5inch deep ledge and a 15inch backsplash. A fold-down design keeps the shelves out of your way until needed. Let your hot dishes settle and cool up and out of the way ...
Provide your new ventilation system with an indispensable accessory. The Vent-A-Hood 30W in. Warming Shelf Assembly is a quick, simple installation that features an out-of-the-way design that's there when you need it. Two steel rack shelves are included in this set, featuring a fold-down design. Ideal for large families and ambitious chefs, this set of warming shelves lets you either cool dishes or keep them warm with the heat siphoned from the stove or oven. Both shelves are made from durable stainless steel and pair perfectly with any Vent-A-Hood products. ...
Your multi-blower kitchen ventilation system will find an invaluable connection piece with the Vent-A-Hood 563 Transition. Combine two Magic Lung vent blowers to transition into a single 12-inch round duct with this unit, increasing the unit's efficiency. Complete your new set or replace/repair your existing Vent-A-Hood brand product. The unit features a galvanized interior that helps direct the vent's output into the duct and won't absorb odors. The unit weighs in at a sturdy 4lbs and is intended for indoor use only.
Everyday cooking gets that much smarter and stylish with the Windster 42 in. Residential Kitchen Range Hood Insert for WS-69TS Series Models. Its seamless brushed stainless steel material easily complements any existing kitchen style. Plus, it's simple to remove the hood for basic cleaning. A low noise setting makes this high-powered hood a perfect addition to your kitchen and life.
Protect your home from grease condensation and impurities from everyday cooking with the Windster 42 in. Residential Kitchen Range Hood Insert for WS-69TB Series Models. This brushed stainless steel hood has a heavy-duty baffle filtration system to efficiently capture impurities. Enclosed squirrel cage motors allow the range hood to operate at a high level of performance, without making too much noise. Incorporate this functional piece above your stove and feel even better about the magic you create in the kitchen.
The Windster WS-38 Series Rear Vent Kit lets you adapt your under-cabinet range hood for a rear duct installation rather than the intended vertical duct. This set is made from sturdy stainless steel and is expertly welded for smooth edges and a seamless design. This unit is intended for use with your Windster brand model WS-38 range hood, ensuring optimal performance for years to come. This rear vent kit has been approved for use by the CSA for use in both US and Canadian homes.
The Vent-A-Hood 562 Transition is a necessary accessory for your multiple blower ventilation assembly, intended for use with Vent-A-Hood brand product. This transitional vent connects a pair of blowers to your 10-inch duct, repairing, replacing, or completing your range hood or ventilation set. The unit is made from sturdy, solid metal with a galvanized interior that won't absorb odors and remains durable for years to come. The transition vent is intended for indoor use only. The unit weighs in at a formidable 4lbs.
Commercial kitchens aren't filled with stainless steel because they're into that clean, modern style that you'll find on the Kobe SSP30 30W in. Backsplash Panel. Stainless steel is the best material for any kitchen, as it's easy to clean and sanitize, and it offers superior resistance to corrosion and staining. This wide panel is made from 18-gague stainless steel with a satin finish.
The Windster 30W in. Back Splash is an ideal accessory to pair with your new range hood. This backsplash is constructed from thin, yet durable, solid stainless steel and features a handsome brushed finish that's easy to wipe clean with just a damp washcloth. Intended for use with 30-inch wide range hoods, this piece pairs perfectly with any contemporary decor. Designed and constructed by Windster, this backsplash mounts easily to the backing wall beneath your hood to keep your wall safe from cooking splatters. This back splash has been approved ...
The Windster 42W in. Back Splash gives you a durable add-on that pairs with any 42-inch wide range hood. This back splash is a snap to add to any wall in your kitchen, attaching sturdily in seconds. Thick, solid stainless steel is used to create this piece, an ideal match for any modern decor and Windster brand range hoods. A brushed steel finish completes the look, protecting it from scratches and letting you easily wipe the surface clean with only a damp rag. This back splash has been approved for ...
Tiles are cool and formica certainly does have a vintage appeal, but the Kobe SSP36 36W in. Backsplash Panel is going to give you a timeless style with durability to match. This wide panel is crafted from 18-gague stainless steel with a satin finish. Stainless steel is naturally resistant to rust and corrosion, and it's tough, smooth nature makes it easy to clean and sanitize.
Make your new island range hood quieter and more efficient with the Windster WS-68 Series CFM Reducer. This convenient accessory is a must-have for your Windster series WS-68 range hood, reducing the total output volume significantly. The unit is made from a combination of stainless steel and plastic, like your hood itself. The CFM reducer is design for self-installation that's fast and effortless. Unit meets regulatory code requirements.
The Windster WS-62N Series CFM Reducer allows you to easily adapt your Windster WS-62N to conform to local code requirements. You shouldn't have to forgo your ideal kitchen appliance due to state or city requirements and this unit reduces the range hoods overall CFM volume to fall within standards. The piece is easy to install yourself and includes all the necessary hardware.
Some areas have strict codes for kitchens, but the Windster WS-50E series CFM Reducer lets you ensure your new Windster range hood falls within compliance standards. This unit reduces the overall CFM output, making sure your kitchen is up to code. The reducer is made from sturdy stainless steel and attaches directly to your hood with a minimum of effort on your part.
Residential and construction codes may vary depending on your area, but the Windster WS-48 Series CFM Reducer helps you comply with local regulations without sacrificing your range hood to an inferior product. Designed specifically for your Windster WS-48 range hoods, this accessory installs quickly and easily with no contractor know-how necessary. Once installed, your CFM output will fall within acceptable code ranges. Unit is made from sturdy stainless steel.
Limit the amount of airflow produced by high-performance blowers with the Windster CFM Reducer for RA-14L Series Models. If removing too much air from inside your space is a concern, or if you are living in a cold weather environment, this reducer can assist. Ensure your airflow is at the desired level of below 300 CFM with this durable reducer.