1-888-880-4884
Email Us
Guest #0--
My Cart
Your cart is currently empty. Sign in to see items you might have added previously.

AZ Patio Heater Portable Hammered Bronze and Stainless Steel Tabletop Heater

Out of Stock
$10203
Product Overview
  • Stainless steel heater with hammered bronze base
  • 11,000 BTUs with variable control
  • Approximate heating diameter: 5 feet
  • Dimensions: 21 diam. x 38H in.
  • Includes cover and screen guard
Specifications
Dimensions
21 diam. x 38H in.
Weight
19 lbs.
Material
Stainless Steel
Assembly
Some Assembly Required
Delivery
Overview
  • Stainless steel heater with hammered bronze base
  • 11,000 BTUs with variable control
  • Approximate heating diameter: 5 feet
  • Dimensions: 21 diam. x 38H in.
  • Includes cover and screen guard
  • Weighted plate adds extra stability
What's Included
Heater
Burner cover
Burner screen guard
Description

Two strong, dazzling metals complement each other beautifully in the AZ Patio Heater Portable Hammered Bronze and Stainless Steel Tabletop Heater. This modestly sized heater has a gorgeous bronze and gold hammered finish that's sure to grab everyone's attention. It runs on a tiny 1 lb. propane tank (not included), but it lasts for hours as it produces 11,000 BTUs of heat. That's enough for a 5 foot diameter of cozy comfort. For your added safety, the Tabletop Heater also features thermocouple and anti-tilt safety devices; CSA approved. Measures 21 diam. x 38H inches. Includes cover and screen guard.

 

Proposition 65 WARNING(S) - For more information go to www.p65warnings.ca.gov
This product can expose you to chemicals including Carbon Monoxide, which is known to the State of California to cause: birth defects.
About AZ Patio Heaters
AZ Patio Heaters

Established in 2002, AZ Patio Heaters has built a name for themselves as a leading US supplier of top-of-the-line heaters and replacement parts. A dedication to customer care and quality control make AZ Patio Heaters a go-to choice for heating in both commercial and residential areas. So step out into the fresh air - no matter what the season - and stay cozy and warm with AZ Patio Heaters LLC.

Specifications
Assembly
Some Assembly Required
BTU
11000
Brand
AZ Patio Heaters
Commercial Grade
Yes
Dimensions
21 diam. x 38H in.
Finish
Bronze
Fuel
Propane
Heating Range Diameter
5 ft.
Material
Stainless Steel
Type
Tabletop
Warranty
1 Year
Weight
19 lbs.
Assembly & Care
Product Guarantee
We stand behind all the products we sell, and your satisfaction is our top priority. If you're not pleased with the quality of your purchase, call us at 1.888.880.4884 or visit our Returns Center for more information.

Manufacturer Warranty

This product has a 1 year manufacturer's warranty against defects is provided. If you have specific questions about this product's warranty please contact AZ Patio Heaters' Customer Service department at (623) 875-1330.

Return & Exchange Policy
You may return most new, unused, and resalable items for a refund or exchange within 30 days of delivery date.

Visit our Returns Center for complete information and step-by-step help.

Displaying1-2of2
Q: How does it start?
Submitted 2 years ago by Patricia - CA
Hayneedle customer support
A: Turning ON the Heater1. Turn on the valve on the gas supply cylinder completely.2. Firmly press down and turn the variable control knob approximately 45° (counterclockwise).3. Press down the variable control knob and hold for 20 seconds. While holding down the variable control knob, press the igniter button several times until the pilot flame comes on.After lighting the pilot, wait 15 seconds to heat the thermocouple, before releasing the control knob. Release the variable control knob after the pilot flame lights.4. If the pilot does not light, repeat steps 2 to 3. Note: If a new tank has just been connected, please allow at least one minute for the air in the gas pipeline to purge out through the pilot hole.5. After the flame comes on, leave the variable control knob on LO for about 5 minutes, and then switch to the desired temperature.
Hayneedle customer support
A: Turning ON the Heater1. Turn on the valve on the gas supply cylinder completely.2. Firmly press down and turn the variable control knob approximately 45° (counterclockwise).3. Press down the variable control knob and hold for 20 seconds. While holding down the variable control knob, press the igniter button several times until the pilot flame comes on.After lighting the pilot, wait 15 seconds to heat the thermocouple, before releasing the control knob. Release the variable control knob after the pilot flame lights.4. If the pilot does not light, repeat steps 2 to 3. Note: If a new tank has just been connected, please allow at least one minute for the air in the gas pipeline to purge out through the pilot hole.5. After the flame comes on, leave the variable control knob on LO for about 5 minutes, and then switch to the desired temperature.
Q: Does this use propane tank or bottle?
Submitted 2 years ago by BR - Lincoln
Hayneedle customer support
A: It runs on a tiny 1 lb. propane tank (not included), but it lasts for hours as it produces 11,000 BTUs of heat.
Open Reply - Community Answer
A: It uses the small bottles not a tank.
Open Reply - Community Answer
A: Uses the small propane bottles.
Open Reply - Community Answer
A: this heater is designed to hold a standard "Coleman" or torch-type propanebottle, but will easily adapt to a hose feed from a large tank. I justrefill the bottles.
1-2
of2BACK TO TOP