The QHY11 features a full 35 mm sized monochrome CCD with 9 micron square pixels. The QHY11 use the popular Kodak KAI-11002 chip commonly found in high end cameras. This camera is a real value compared to the competition and comes with the high standards of performance. The camera uses one cable to connect to the filterwheel to provide both power and control. The end result is fewer cables and a nice clean installation. QHY CCD astronomical camera.
Total pixel :4072*2720
Active pixels:4032*2688 11Mpixels
Pixel Size: 9.0um x 9.0um square
Imager size 36mm*24mm
Imager size 43.2mm
Readout noise: 12-14e- at 1Mpixel/s
Preview Speed: 3Mpixel/s
Peak QE: 50%
Microlensing on chip
CCD Readout Progressive Scan
16bit ADC with CDS and Preamp
USB2.0 High Speed interface
2-Stage TEC cooling
Built in 32MByte SDRAM buffer
Built in temp sensor
Single cable for for QHY Colorwheel control and power
DC201 DC adapter & regulated TEC controller
USB2.0 High Speed interface
Guide port - built in Optic isolated guide port RJ11 6pin (ST4 type)
Desiccant Silicon tube
We stand behind all the products we sell, and your satisfaction is our top priority. If you're not pleased with the quality of your purchase, call us at 1.888.880.4884 or visit our Returns Center for more information.
QHYCCD Camera Warranty Period
QHYCCD provides a Two Year warranty period Except for the following items:
CCD/CMOS Sensors: Kodak's Sensor is under Kodak's warranty period of one year from the time KODAK ships to QHYCCD. Sony's Sensors have a two year warranty from the date of original sale to end user.
TEC modules: Have a One year warranty.
Cables: Have a one year warranty.
Repair Warranty Conditions:
The camera is warranted to be free of defects and will be repaired at no cost for the warranty period with normal use. Any damages due to improper use or incident are not under warranty. End user is responsible for shipping costs to the manufacture.
The following conditions are not covered under warranty
CCD Chips will develop bad columns from time to time. If a defect column should appear after initial use, once the camera is put into operation, it is not considered a defect given that normal image calibration removes bad columns. If the CCD sensor exceeds the warranty period, QHYCCD will replace the CCD sensor at the end user expense
CCD sensor damaged by static discharge due to improper grounding of AC power supplies.
Scratch on CCD sensor
Water damage from exposure to water leaks
Low CTE columns (if there are two low CTE columns nearby and it cannot be fixed by normal calibration tools, QHYCCD, will replace it)
Return & Exchange Policy
You may return most new, unused, and resalable items for a refund or exchange within 30 days of delivery date.
Visit our Returns Center for complete information and step-by-step help.